Blisscals are easy to apply and won’t damage your car or home windows with sticky residue. There are two types of blisscals. Static cling blisscals for use Inside on your home, office, and car windows and Outside Apply blisscals which have an easy to remove adhesive and are for use on the outside of your car windows.
 Applying Static Cling Blisscals
Static Cling blisscals are removable and re-usable. You can move them around or change them, as you like!
Static Cling blisscals are for use inside and can be placed on any glass surface such as windows in your car, home, or office, glass table tops, desks and doors, as well as mirrors, dry erase boards, and computer screens.
Simply peel the decal off the backing and smooth into place. Apply on a clean dry surface. Smooth on the blisscal from the center out adjusting as need be. To remove air bubbles smooth over with a hard straight edge such as a credit card.
To recharge your cling rinse it under cold water and it will stick well again and again. Save the plastic backing for safe keeping when your blisscal is not in use.
On a car window apply inside, facing out. The static cling blisscals are not for use outside. They are visible through the rear window of most cars with partially tinted windows. If you have dark tinted windows (most SUVs and minivans have these) you may prefer an outside apply blisscal. See the Guidelines for choosing between outside apply and static cling blisscals below. You will be able to read your static cling blisscal as you look in the rearview mirror whichever type of window you have.
Applying Outside Apply Blisscals
 Outside apply blisscals are meant to be applied on the outside of a carwindow. They are adhesive decals that are easy to remove but they cannot be re-used. These blisscals were created primarily for use on SUVs, minivans and some cars that have dark tinted windows. Applying the decal on the outside of the window allows your blisscal to be seen and appreciated easily. You will also be able to read the blisscal yourself in the rear view mirror.
Select a location for your blisscal. Clean and dry the window surface. Remove the blisscal from it’s backing and apply it to the window smoothing it out to the edges as you press it down. Note that the outside apply blisscal is easy to remove but once it is removed it does not stick well again.
Guidelines for Choosing between outside apply and static cling blisscals
If you have dark tinted windows that you can not see in from the outside (most vans and SUVs have this type of window in the back of the vehicle) use the following guidelines to decide which type of blisscal to purchase (static cling or outside apply)
- Choose an outside apply blisscal if you want your decal to be visible on the outside of your car. Our outside apply blisscals are NOT re-usable. They are adhesive decals that are easily removable (won’t leave a sticky residue) but they cannot be reused.
- Choose a static cling blisscal if you want to be able to read your blisscal in the rearview mirror and re-use it in other areas or change the message in your car but don’t want it to be visible through your rear window. Other drivers won’t be able to read it, but you will when you look in the rearview mirror! So, it still works to make you feel good.
|
